How to Install TWRP and Root on Huawei P9 Lite

How to install TWRP and Root on the Huawei P9 Lite, if you want to update your Huawei P9 Lite via a custom rom and not just do this, you just have to carry out these two procedures. First install a custom recovery, then get root permissions. With the guide that follows let's see how to install TWRP and Root on the Huawei P9 Lite.

Caution: this tutorial is for Huawei P9 Lite. Do not try this guide on any other Android device. Furthermore, we are not responsible for any damage caused by the instructions provided on this page. Try this guide at your own risk. However, it is very unlikely that the device will be damaged if you follow all the instructions that have been mentioned in the procedure.

I recommend that you make a backup of your device, in case something goes wrong.

First thing to do before moving on to the guide is to install the USB drivers of your device on the PC, otherwise your smartphone will not be recognized by the computer, and will not be able to communicate with it, therefore, download the USB drivers. ed installateli.

How to Install TWRP and Root on Huawei P9 Lite

Once the drivers have been installed, now you need to enable the USB DEBUG on your smartphone, in order for the PC to see all the internal memory of your phone, to do this, read this very simple guide.

Now some devices may need to unlock the OEM, another easy procedure, which you can find in this guide.

Now you need a good backup of your deviceand this can be done in a lot of ways, I like Nandroid Backup, which can only be done if you have a custom recovery installed. If you haven't installed it yet then read here.

You must make a backup of your phone, because at the end of the procedure all the data on your phone will have been deleted

ADB and Fastboot installed, read here or here to find out how.

Unlock the Bootloader read here to know how to do it

Download this Zip file, which contains the TWRP package and the file for the root | Link

How to Install TWRP and Root on Huawei P9 Lite

  1. Download the zip file from above, which contains both TWRP and the Root file.
  2. Now copy the main package "SuperSU Zip" in the device memory and move all the remaining contents of the folder extracted with TWRP.img to the ADB folder in C:
  3. Open CMD in the ADB folder. Press and hold the shift key + right mouse button on an empty space> then click on "Open a command window here"
  4. Now connect the P9 Lite to the PC and execute the following commands one by one.
    • adb devices
    • adb reboot bootloader
    • fastboot flash recovery xxxxxx.img
    • Replace xxxxxx in the command above with the original name of the TWRP file then press the Enter button.
    • adb reboot recovery
  5. The above commands will install TWRP recovery.
  6. Once finished, restart the device in recovery mode.
  7. Now tap Install → choose and select SuperSU Zip → then Swipe at the bottom of the recovery screen to confirm.
  8. Finally, go back and tap reboot followed by system to reboot your device normally.
  9. Done !

add a comment of How to Install TWRP and Root on Huawei P9 Lite
Comment sent successfully! We will review it in the next few hours.